Selleys Ex-In Wall Sealer 17L

(No reviews yet) Write a Review
B$18.00 B$15.50
(You save B$2.50)
  • Selleys Ex-In Wall Sealer 17L
On Sale

Selleys Ex-In Wall Sealer
Selleys Exterior And Interior Wall Sealer Is Specially Formulated Waterborne Wall Sealer Based On A Styrene Acrylic. It Gives Ample Alkali Resistant And Hiding At A Lower Cost.


Physical Properties:

  • Theoretical Spreading At Recommended Film Thickness: 8-9 Square Meter Per Litre
  • Drying Time: At Tropical Ambient Temperature Of 30??C
  • Touch Dry: Within &Frac12; Hour
  • Hard Dry: 1 Hour
  • Recoating: 2 Hours
  • Application: Brush And Roller
  • Thinning/Cleaning: Water



  • Water Based
  • Low Voc / Odour
  • No Mineral Solvents
  • No Lead / Mercury
  • Fungus Resistance
  • Good Adhesion Property


Surface Preparation:

  • The Surface To Be Painted Shall Be Allowed To Dry Until Below 16% Moisture Content As Measured With Protimeter. Ensures Surfaces Shall Be Dry And Free From Dirt, Dust, Oil, Grease And Foreign Matter. Surface Unevenness, Cracks Etc Shall Be Made Good With A Suitable Filler/Render.


Safety Tips:

  • Keep Container Tightly Closed. Keep Out Of Reach Of Children
  • Store Material In A Cool, Well-Ventilated And Dry Place, Away From Direct Sunlight.
  • Ensure Adequate Ventilation During Application.
  • Keep Away From Excessive Heat, Sparks Or Flame.
  • Avoid Contact With Skin Or Eyes. Any Skin Or Eye Contamination Should Be Washed Off With Plenty Of Water Or Seek Medical Attention.


Material Safety Data Sheet:


Related Products