null

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Selleys Liquid Nails Mirror 310G

(No reviews yet) Write a Review
B$8.00 B$4.00
(You save B$4.00)

Dear Customer, Please check stock availability before payment. Whatsapp: 7177125

  • Selleys Liquid Nails Mirror 310G
On Sale

Selleys Liquid Nails Mirror 310G
Is A Premium Grade, High Strength Construction Adhesive That Has Non-Corrosive Properties When Being Used On Mirrors. Most Other Construction Adhesives Do Not Have This Capability And Will De-Silver The Mirror. Liquid Nail Mirror & Aluminum Is Heat And Steam Resistant Which Is Important When Fixing Mirrors To Walls In Bathrooms.

 

Ideal For:

  • Mirror
  • Aluminium
  • Metal
  • Steel
  • Glass

 

Features:

  • Heat & Steam Resistant
  • High Temperature & Uv Resistant
  • Will Not Discolour Mirrors
  • Strong Vertical Hold
  • Non-Corrosive
  • For Interior & Exterior Use

 

Direction:

  • Ensure The Surface Is Sound, Dry, And Free From Oil, Grease And Dust.

 

Application For Mirrors:

  • For Mirrors Up To 6Mm Thick, Apply Strips Of Adhesive Approximately 8Cm Apart. Do Not Apply Adhesive Within 5Cm Of Mirror Edge.
  • Immediately After Applying Adhesive, Place Mirror Against Wall Before Adhesive Skins (Within 5 Minutes).
  • When Mirror Is Pressed Onto The Wall, Strips Of Adhesive Must Not Spread Into, Or Touch One Another. A Gap Must Remain Between Them.
  • Hold In Place With Temporary Supports (E.G. With Clips Or Tape) To Maintain Adhesive Contact Over The Total Bond Area Until Sufficient Adhesive Strength Has Developed (Normally After 72 Hours).
  • Do Not Seal Around The Edges Of The Mirror For At Least A Week To Allow Air Circulation.
  • Mirrors Should Not Be Fixed Directly To Unpainted Timber, Plaster, Concrete Or Brick Walls. These Surfaces Should Be Painted To Prevent Potential Damage To Mirror.

 

General Application:

  • Painted Surfaces Should Not Be Flaky Or Peeling. Freshly Painted Surfaces Should Be Allowed To Dry For At Least 7 Days, Before Job Is Done. Test For Compatibility On Painted Surfaces, Before Using.
  • Not For Permanent Water Immersion.
  • Not For Rigid Bonds (Eg. Broken Glass).
  • Adhesive Requires Air To Cure.
  • Clean Up While Wet With Mineral Turps.

 

Handy Tips:

  • If Repositioning Materials, Fresh Adhesive Must Be Applied To Achieve Bonding.
  • Liquid Nail Mirror & Aluminium Cannot Be Used As A Contact Adhesive.
  • Working Time Is 10 Minutes. Ensure Surfaces Are Brought Together Before This Time.
  • Wipe Up Any Spills And For Cleaning Any Material Off The Skin Before It Cures.

 

Safety Tips:

  • On Contact, Uncured Sealant Can Irritate Eyes.
  • If In Eyes, Flood With Water For At Least 15 Minutes And Seek Medical Advice.
  • Avoid Contact With Skin. If Contact Occurs, Wipe Off Immediately And Wash With Detergent. May Irritate Sensitive Skin.
  • Avoid Breathing Vapours.
  • Ensure Use In A Well Ventilated Area, Product Releases Methyl Ethyl Ketoxime While Curing.

 

Material Safety Data Sheet:

Download