Selleys Multigrip 30Ml
A Strong, Clear, Flexible Multipurpose Adhesive. Ideal For Repair Of Household Items And Use For Craft And Hobby Projects.
Ideal For:
- Metal (Jewellery, Toys Etc)
- Most Plastics (Toys, Dolls Etc)
- Canvas (Deck Chairs, Tents Etc.)
- Timber (Models, Toys, Etc)
- Fabric
- Crockery
Features:
- Dries Clear - No Unsightly Joints
- Water Resistant
- Flexible - Non-Rigid Bond Allows Some Give In The Joint
- Fast Bonding - Instant Bond Using Contact Method
- An All-Purpose Glue Which Bonds Most Materials
- Grabs In Minutes - The Exact 'Grab Time' Depends On The Surfaces To Be Joined
- Interior And Exterior Use - Can Be Used Both Outside And Inside And Stands Up To Wet Weather Conditions
- Fast Drying
Direction:
- Remove All Dirt, Dust And Grease From Surfaces To Be Joined. Unscrew Cap And Carefully Pierce Diaphragm In Tube With A Nail Or Paperclip. Replace Nozzle Part Of Cap
- Squeeze Gently, Apply An Even Coating Of Multi Grip To Both Surfaces To Be Joined. Press Surfaces Together And Clamp Or Hold Firmly For Approximately 1-2 Minutes Or Until Adhesive Grabs. (Instant Bonds Can Be Achieved With The Contact Method By Coating Both Surfaces And Wait Approximately 1 Minute Before Pressing Parts Together Firmly.)
- Leave Assembly Undisturbed Until Adhesive Fully Dries. Approximately 10-12 Hours Is Needed To Achieve Strength For Normal Use. Maximum Bond Strength Is Achieved After 24 Hours Or Longer If Large Areas Or Non-Porous Materials Are Being Bonded.
- Replace Cap Firmly On Tube For Storage. Ensure No Residue Remains On Thread Of Tube Before Replacing Cap.
- Clean Up Spills With Acetone Or Nail Polish Remover. (Note: These Are Aggressive Solvents And Can Damage Some Surfaces Of Many Materials. Its Effect On The Material Should Be Trialed On An Inconspicuous Area First.)
Handy Tips:
- For Very Porous Surfaces - Apply A Thin Coating Of Adhesive To Both Surfaces And Allow To Dry (Approximately 5 Minutes). Apply Multi Grip Again And Follow How To Use Guide.
- To Extend Life Of Product Always Apply The Cap When Not In Use.
- For Excess Adhesive On Hands, Apply A Solvent Such As Acetone (Most Nail Polish Removers) Then Wash Off With Soapy Water Followed By Sorbolene Cream Or Vegetable Oil.
Safety Tips:
- Handle With Care, Highly Flammable.
- Intentional Misuse By Deliberately Inhaling The Vapours From This Product Can Be Harmful Or Fatal.
- If In Eyes, Hold Eye Open, Flush With Water For At Least 15 Minutes And Obtain Medical Attention.
- If Skin Contact Occurs, Remove Contaminated Clothing And Wash Before Re-Use. Scrape Off Skin While Wet. Wash With Plenty Of Soap And Water.
Material Safety Data Sheet:
