Site Information

CONNECT WITH US

 Loading... Please wait...
  • Selleys Wet Area Speed Seal-White 300G

Selleys Wet Area Speed Seal-White 300G

SGD8.00
Quantity:

Product Description

Selleys Wet Area Speed Seal-White 300G
Super Fast Cure And Stiff Consistency Provide A Waterproof Seal To Allow Shower Use 2 Hours After Application. Cured Sealant Is Formulated To Resist Growth Of Unsightly Mould And Mildew.

 

Ideal For:

  • Showers
  • Baths & Spas
  • Sinks
  • Plumbing Fixtures
  • Ceramic, Glazed & Porcelain Fixtures
  • Metal
  • Copper & Brass Fittings
  • Powder Coated Aluminium / Aluminium
  • Plastic Laminates
  • Rubber
  • Glass
  • Stainless Steel
  • Concrete & Grouts

 

Features:

  • Waterproof
  • Mould Repellent
  • Resists Lifting
  • Neutral Cure
  • 100% Siliconee
  • 25 Year Guarantee*

 

Direction:

  • Clean & Dry Surface Using Mineral Turpentine.
  • Cut Tip Off Cartridge And Cut Nozzle At A 45°Angle. Fit Nozzle To Cartridge. Place Cartridge Into Caulking Gun.
  • Hold Caulking Gun At 45°Angle And Gun Sealant Ahead Of Nozzle Ensuring Product Is Pushed Into Joint.

 

Handy Tips:

  • For A Smooth Finish, Tool With Spatula Within 5 Minutes Of Application. For Best Finish Dip Spatula In Detergent.
  • Excess Sealant Must Be Cleaned Up Before Product Skins. Wipe Away Excess With A Cloth Dampened In Mineral Turpentine.
  • Sealant Will Have A Firm Skin And Will Be Waterproof And Shower Ready 2 Hours After Application In Showers. The Semi-Cured Sealant Must Not Be Touched Until Fully Cured (48 Hours).
  • For A Large Job, Break Up Into Sections Tooling Off After Each, Before The Sealant Skins Over.
  • For A Better Finish Complete Painting Prior To Use Of Sealant As It Cannot Be Painted Over.
  • For A Cleaner Appearance Mask Both Sides Of Joint Prior To Sealing. Remove Tape Before Silicone Skins.
  • Not Recommended For Use In Aquariums Or Where There Is Contact With Food, Eating Utensils Or Drinking Water.
  • Store In A Dry Place Below 30°C. After Opening, Use Within 6 Months.

 

Safety Tips:

  • Uncured Product May Irritate Eyes. If In Eyes, Flood The Eyes For At Least 15 Minutes And Seek Medical Advice.
  • Avoid Contact With Skin, If Contact Occurs, Wipe Off Immediately And Wash With Detegent. It May Irritate Sensitive Skin.
  • Avoid Breathing In Vapours.
  • Ensure You Use A Well Ventilated Area As Product Releases Methyl Ethyl Ketoxime While Curing.
  • For Advice, Contact A Poisons Information Centre (Aus 131 126; Nz 0800 764 766) Or A Doctor.
  • Keep Away From Children.

 

Material Safety Data Sheet:

Download

Product Reviews

Find Similar Products by Category