TSG Thread & Flange Sealing
Typical Uses:
Anaerobic metal pipe thread sealant with PTFE as filler, widely used in plumbing installation of galvanized steel pipe fittings, such as: central air-conditioning hot and cold water, gas, fire fighting, air pressure, water supply and heating Wait. Solve the pipeline sealing problems, metal pipe sealing technology is a revolution. The third generation of the liquid raw material tape LT150 is not only used for pipe thread sealing, but also can be used for flange plane sealing, performance better than traditional solid gasket, such as: asbestos mat, rubber mat and so on. Sealing thickness from the second generation 0.25mm increased to 0.5mm, and easy maintenance disassembly, advanced technology in similar product.
|
Product code |
Packaging specifications |
Viscosity MPa.s |
Working temperature |
The highest voltage |
Maximum |
M10 bolt |
Curing time |
Remarks |
|
100 light yellow |
200mL / bottle |
8000 ~ 11000 |
-55 ~ 150 ℃ |
680kg / c㎡ |
0.25mm |
28N.M high strength |
30min first solid 24h solid |
Special use of ultra-high pressure pipe. |
|
100A light yellow (second generation) |
50 mL / bottle |
8000 ~ 11000 |
-55 ~ 135 ℃ |
300 kg / c㎡ |
0.25mm |
16N.M medium strength |
30min first solid 24h solid |
The best suitable diameter DN15 ~ DN80. |
|
150 purple (third generation) |
50 mL / tube |
30000 ~ 47000 |
-55 ~ 125 ℃ |
300 kg / c㎡ |
0.5mm |
11N.M easy to remove |
30min first solid 24h solid |
For pipe thread and flange, the applicable diameter DN15 ~ DN150, the key recommendation. |
Note:
For stainless steel alloy materials, please consult the sales department Stainless steel pipe thread sealant Lteteo 577 models.
Features:
(1) Through the "National Chemical Construction Materials Testing Center" pressure resistance to high and low temperature testing, "Guangdong Provincial Center for Disease Control and Prevention," water quality and safety testing, SGS issued by the ROHS certificate, the EU CE certification, the environment and water quality does not result Pollution;
(2) at room temperature, non-volatile, non-curing, excellent stability, can be used in the machining accuracy is not high, or even the lack of teeth on the thread used to seal the redundant excess liquid glue clear, will not plug the pipeline System, joint spill glue is not cured, clear simple, does not affect the facilities, equipment, the original beautiful effect;
(3) pipe fittings can be adjusted in the assembly of any angle, does not affect the sealing quality; glue without solvent does not shrink , Fully cured slightly expanded, so as to fill the entire thread gap to achieve a good seal sealing effect, sealing pressure up to 30Mpa above;
(4) anti-aging, corrosion resistance, acid and alkali resistance, most of the media in the metal thread surface since rust prevention, weather resistance, good shock resistance;
(5) Removal moderate strength, a common wrench to tighten or hand-tighten slightly The tube clamp removal, demolition of large-sized tube strength increases, the available gas heated gun disassembled, the pipe joint can be disassembled again washed using adhesive.
(6) The comprehensive cost is low, the construction operation is simple, the installation is convenient, the rubber coating can be directly applied to the thread, and the cumbersome winding thread interface is not required, thereby greatly improving work efficiency.
